Bidding Information

Description:
The Bidder, or its sub-contractors, shall be classified by the State of New Jersey – Division of Property Management and Construction in one of the following classifications:

C009 General Construction/Alterations & Additions
The Bidder shall further name and include all required pre-qualification information for the following Subcontractors
C030 Plumbing*
C032 HVACR*
C047 Electrical*
*Copy of licenses must be included with bid

General Construction, including, but not limited to
1. Selective demolition responsibilities included within the scope of the project shall include the following Demolition of construction designated and required to accommodate the new work, including finished ceilings, non-asbestos containing floor finishes, doors, door frames as noted, toilet partitions, accessories and related equipment designated.
a. Demolition of construction designated and required to accommodate the new work, including finished ceilings, non-asbestos containing floor finishes, doors, door frames as noted, toilet partitions, accessories and related equipment designated:
b. Existing masonry construction as indicated and as required to accommodate the scope of the work proposed.
c. Removal of wall mounted equipment and furnishings as designated and required to complete the scope of the proposed work
d. Preparation of existing masonry wall and substrates as required to accommodate the proposed construction.
e. Removal of existing ceiling systems, and repair, patching and preparation of existing construction designated to remain as required to accept the specified finishes.
f. Removal and restoration of acoustical panel ceiling systems, including coordination and sequencing of the work with the owner and other con-tractors.
g. Patching of building finishes damaged or altered as a result of the work of this contract
h. Patching and repair of roofing finishes.  The contractor is advised that roof areas impacted by the work of this contract are under warranty.  Repairs and alterations to these roof systems must be performed in strict conformation with the written requirements of the roofing system manufacturer, and performed by a roofing contractor pre-qualified by the roofing system manufacturer.
i. Cutting, patching and restoration of existing interior and exterior finishes to the extent required to accommodate the work of this contract.
2. Masonry construction where shown and as required to infill abandoned door openings.
3. Painting of walls and door frames, including preparation of all surfaces to be painted.
4. Application of ceramic tile where noted.  Ceramic tile size, depth and coursing to match existing, and shall be coated with an epoxy coating finish as directed.
5. Supply and installation of new doors, door frames and hardware as shown and indicated within the Contract Documents.
6. Supply and installation of new ceiling systems, and preparation for the installation lighting fixtures and other ceiling mounted devices.
7. Supply and installation of new toilet partitions.
8. Supply and installation of new toilet rooms accessories, including grab bars and mirrors.
9. Preparation for new floor and wall base finishes.
10. Supply and installation of new interior signage indicated.
11. Roof cutting, patching and restoration to the extent required to accommodate the work of this contract.  Refer to the Mechanical, Plumbing and Electrical drawings for the extent of new openings, penetrations, curbs and pipe supports requiring cutting and restoration of new warrantied roofing system.

ii. Mechanical Work, including, but not limited removal of existing mechanical systems as indicated and required, supply and installation of new exhaust fans, duct work and diffusers, renovation of the existing exhaust systems, modification of existing roof curbs and supports systems as indicated and required, installation of new transfer grilles and fire dampers, supply and installation of new cabinet unit heaters including new hot water supply and return piping. and relocation of existing mechanical work but in conflict with new construction proposed as a part of this contract.  Equipment will be integrated into the BMS by the Owner’s integration Contractor (AME Inc.).

iii. Plumbing Work, including, but not limited removal of existing plumbing systems and fixtures as indicated and required, supply and installation of new water service, drainage systems and fixtures, and relocation of existing plumbing work designated to remain but in conflict with new construction proposed as a part of this contract, and supply and installation of new plumbing services shown and required for a complete operating system.

iv. Electrical Work, including, but not limited removal of existing electrical systems as indicated and required, supply and installation of new electrical systems, devices, lighting fixtures and accessories, relocation of existing electrical work in designated to remain but in conflict with new construction proposed as a part of this contract, and supply and installation of new electrical services shown and required for a complete operating system.  Operating systems shall include all mechanical and plumbing systems, electrical operators and controls, and equipment scheduled to be provided as a part of this contract as well as under the scope of a separate contract(s).

Addenda:
All questions pertaining to the contract documents, technical sections, legal documents, and bid submission shall be directed in writing, no later than Wednesday, January 22, 2025 at 5:00 pm to The Design Collaborative, Architects & Planners, PA: fax: (609) 465-9358; email: Office@tdc-tvc.com.

IF NECESSARY, AN ADDENDUM WILL BE ISSUED on or before Thursday, January 23, 2025.

Bid Submission/Deadline

Bids Due By: Tuesday, February 4, 2025 at 1:00pm

Submit Bids to:
Lenape Regional HSD Board of Education
93 Willow Grove Road
Shamong, NJ 08088
Phone: 609-268-2000

Bid Results

None listed at this time.